Home Customers cars Contact us Services we offer
 

Here are a selection of some of our customers cars and a description of what work we have done on each car:

Frua Bodied Jaguar E-type

This one off Frua bodied e-type came to us for a bare metal restoration, as seen in the additional photos the original paint suffered from intense crazing throughout, the body and engine framework were sandblasted back to is original metal, mechanical work entailed removal of engine and all components, overhaul of the carburettors, fitment of a racing clutch and flywheel along with some fine detailing.

This beautiful Jaguar was featured in Octobers "Jaguar World" due to its shear rarity.

CLICK HERE FOR MORE INFORMATION AND MORE PICTURES OF THE CAR

 
     
Rolls Royce Corniche II

This vehicle came to us with damage and surface corrosion down the near side. We repaired the damage with no problem and dealt with the corrosion by sand blasting the affected area, but the Rolls Royce’s and Bentleys of this era were painted in an acrylic based paint which is now unavailable. To overcome this problem we were able to use cellulose paint without causing any problems with the original paint, or worrying the customer with having to strip the old paint off.		  
     

Porsche 911 Carrera RS

This lovely example of 1972 Carrera RS use to have a sunroof but was replaced with a complete hard roof, unfortunately where the new roof had been welded on corrosion had started to get in between the two layers of steel, and this was causing paint problems along the roof channels. We stripped the paintwork right back; sand blasted the corrosion and managed to fade the colour in across the roof. Also there were corrosion and stone chips all across the bottom of the wings. The bumpers being fibre glass were showing signs of stress fractures and cracks. The car looked great after the work was complete as seen here all polished up ready for the customer.

  
     

Bentley Mk VI

The Bentley has had various bits of paintwork done over the years, this time the customer had damaged the off side front wing. A relatively simple repair although matching this particular colour was very difficult, but we persisted and got there in the end. Also we had to stop the sunroof from lifting at high speeds, these are all jobs we can handle with ease due to our excellent training.

  
     

Aston Martin DBS

This car has a bit of a design flaw, if you leave the petrol flaps up, remember it’s got one each side and lift the boot lid the two panels collide. That is what happened here, luckily there was no damage to the fuel flap and boot lid hadn’t split as its aluminium. We straightened out the damaged edge, matched the colour no problem and repainted the boot lid.

  
     
Peugeot 206

We don’t just do prestige vehicles, this is a good example. We had to prepare, paint and fit this awesome body kit. It’s a genuine Peugeot ecosse bodykit, but it wasn’t perfect and needed a lot of time spent to get it right and modify it to the customer’s specifications.

 

  
     

Ferrari Daytona

Both front wheel arches were heavily corroded, so they were replaced. Once the metal work was complete a lot of care was taken to get the correct shape of the arches just right both sides. There was also corrosion coming through the paintwork in various places around the car. We decided the best way to deal with the problem was to remove all the corrosion using a sand blaster on the affected areas, then re-paint both sides of the car which we did and it looked like new once we had finished with it.

  
     
Mitsubishi Evolution VII

This car had sustained damaged to the offside front wing, the panels on these cars are made from an alloy/aluminium and are very expensive and very difficult to weld. We managed to weld up the split and repair the wing without the customer having to buy a new wing. Also there were minor grazes and scratches around the car which we dealt with. We have seen this car on a number occasions and with all the lampposts around I don’t doubt it will be back before long.		  
     
Camero

Unusual vehicle to see in this country, this had minor damage to the front bumper and right hand front wing. We repaired and painted the damage. Another satisfied customer.		  
     
Aston Martin DB7

This customer is passionate about his car, and rightly so, it’s a beautiful example with the extra works body kit fitted. This car had stress fractures and a large dish (dent) in the nose area, also a large dent on the off side rear wing. We investigated the stress fractures and found they didn’t penetrate far into the plastic. We repaired the dish in the nose area and repaired the damage to the wing. After doing a few extra bits on the car as requested by the owner whilst we had it in it was ready for collection. The paint on this car is a light pearl, it changes colours depending on the angle of the light and it looked great on the frosty morning when we took the pictures.		  
     
Frogeye Super Sprite

This is lovely little copy of an Austin healey sprite, classic looks with a modern running gear. The sprite had damage all down the nearside and although the panels are fibreglass there was no actual panel damage. We also had to deal with some trim work on this car. Where the handbrake is situated the trim work had been caught by the handbrake and damaged it. We don’t do our own trim work but the guy who does it for us is second to none, probably one of the best in the country, He made a great job of replacing the damaged trim. Also the side screen rubbers had perished and were split so we dealt with that whilst the car was with us having the paintwork done.		  
     
Mercedes 320 CLK

A simple job on a lovely car. The boot lid had been damaged, so we had to fit a new lid. Supplied, painted and fitted the new lid and of course swapping all the electrics and components over. Another very happy customer.		  
     

VW Beetle

A great project, this is the second car built by this owner the last one was unfortunately destroyed by fire. This one is bigger and better then the last one, this has been completely stripped out, the body sand blasted and we completed all the bodywork and paintwork. It’s fitted with a 2ltr turbo Subaru Impreza engine and will be running in competitions at Santa Pod raceway soon.

CLICK HERE FOR MORE PICTURES OF THE CAR